fish tank -- part of aquaponic balcony garden

The fish tank is where the fish and fish water of growing plants are located.
There are also three (3)
Automation Components-
First, as an ultrasonic distance sensor, it can measure the water level in the fish tank very specifically at any time.
Fish water gentle and simulated float switch-back-
Ultrasonic elements are also supported.
There are pump input connections and pumps in the tank, providing filtration and biology
The treated water enters the growth bed through an anti-overflow mechanism.
The drain pipe returned from the growth bed will also return to the fish tank, and there are 1 \"inch pipes and plug-in fittings to help with this task and connect to the fixed cover section of the building.
A removable lid is also part of the fish tank.
The yellow rotatable cover provides dual functionality.
First, help prevent unwanted items that may fall into the fish tank and creatures that may want to eat fish.
Another function is the yellow lid, which allows light to pass through, and the fish is able to feel the difference between day and night, which is very important for the overall health and overall well-being of the fish of your choice to be cultivated in the system.
The last item found in the fish tank was the water outlet.
The basic function of this is to provide an opening where the water of the fish can be pulled by filtration and biological filtration
The processing assembly is then pumped into the growth bed to provide nutrition to the plants.
If there are small fish in your system, this opening needs to have a protective device to let the water pass through, but allow the small fish to be sucked into the opening.
If you are using a big fish of a strong swimmer, this device does not require that much because the fish will be strong enough to swim from any sucking action caused by the pump through the system assembly.
It should be noted that the fish tank also provides support for the growth bed platform where the growth bed container is located and supported.
One point of interest in water flu from fish tanks is that no actual tank water is pulled into the pump through the fish tank.
The pump will be supplied only after passing through the solid filter and bio filterREACTOR.
The pump is located in a fish tank and is only used as a way of a monastery to prevent water from being delivered to the growth bed using the opening already provided by the growth bed overflow mechanism.
The design efficiency is provided for the system and allows the overall floor area of the balcony garden to be much smaller.
Fish tank Options: in most cases, the interior of the fish tank is White if not all balcony garden photos.
When you buy it, the fish tank is not white.
The interior of the fish tank has been coated with rubber coating materials.
If this look is required in the building, make sure that this effect is achieved using food and fish safety materials.
In the resource steps of this guide, you will find detailed resources about what to use, as well as links to MSDS for materials used for this build.
Featured Project as MAKE Magazine-
47 volume process improvement: this version can be improved at any time.
These improvements can and will take many different forms.
Changes will be made when new tips or better parts are learned.
Aquaponic DIY Automation blog and new ideas will be updated
Parts or changes will be updated in this structure.
So if your ideas and modifications are valuable to other people who are interested in this project, please send your ideas and modifications and the design modifications can and will be made.
Visit the store and learn about the projects that are being talked about here: the main purpose of the balcony garden of the AGponics store is to provide a source of materials for local projects and adhere to the basics of Aquatic Science. Using two 27-
The gallon tote bag allows to follow the first rule of the system based on aquaculture media.
This rule is \"there should be a 1: 1 relationship between growth --
Bed and fish tank. The 27-
The gallon tote covers a very small area and can also be purchased in all large box shops and Costco.
It must be noted that not all 27-
The gallon tote bag is equal.
Each source you go to has a tote bag of different designs.
From a distance they all look the same
Body black, yellow on top.
The fact is, the yellow top has different design configurations
Some are square.
Some are diamonds.
The black trash can is also very different.
This is important because it affects the location of the key components of the fish tank.
In order to be able to seal the tank at the penetration point, it is essential to use a flat surface.
This will change the inlet and outlet of the fish tank as well as the location of the pump.
Depending on which 27-
The gallon tote bag being used and where to buy it from.
It should also be noted that,
Sellers often change the design of manufacturers and manufacturers.
So be careful with this fact.
If you only do one of them, it\'s not a big deal, however, if the bin is broken or damaged, make sure to match the first tote bag with any new tote bag purchased, otherwise, the placement of key parts of the fish tank will not match the original pass to the tank inlet and outlet as well as the penetration holes of the pump. BEWARE -
Source of careful handbag: 27-
Standard card buckle cover 27 gallon tote bag-
Gallon Tough handbag, black/yellow, set monthly gallon.
Black storage bag--
HDX model HDX27GONLINE (5)
Internet 206126311 inlet is the area where treated water is supplied to the pump for delivery to growth-bed.
This process uses water to provide nutrition for the growth of plants.
More details will be added later for this part of the build.
This needs to be referenced for the Make Magazine volume.
Issue 47, and view other build details specific to the tank entry structure on the make project page.
Process improvement: this build can be improved at any time.
These improvements can and will take many different forms.
Changes will be made when new tips or better parts are learned.
Aquaponic DIY Automation blog and new ideas will be updated
Parts or changes will be updated in this structure.
So if your ideas and modifications are valuable to other people who are interested in this project, please send your ideas and modifications and the design modifications can and will be made.
Visit the store and learn about the items being talked about here: AGponics StoreFish water exits the fish tank at this point.
From here, water enters the solid filter and enters the growth process. bed.
More details will be added later for this part of the build.
This needs to be referenced for the Make Magazine volume.
Issue 47, and view other construction details specific to tank construction on the production project page.
Process improvement: this build can be improved at any time.
These improvements can and will take many different forms.
Changes will be made when new tips or better parts are learned.
Aquaponic DIY Automation blog and new ideas will be updated
Parts or changes will be updated in this structure.
So if your ideas and modifications are valuable to other people who are interested in this project, please send your ideas and modifications and the design modifications can and will be made.
Visit the store and learn about the items being talked about here: The lid of the fish tank at the agpolics store provides support for the fish tank and also provides a safe structure for sensors and regression growth --
The bed water will be renewed.
Total balcony garden.
These important parts of the balcony garden are designed with operational functions.
More details will be added later for this part of the build.
This needs to be referenced for the Make Magazine volume.
Issue 47 and view other build details specific to the fish tank lid structure on the make project page.
Process improvement: this build can be improved at any time.
These improvements can and will take many different forms.
Changes will be made when new tips or better parts are learned.
Aquaponic aquaponic DIY Automation blog and new ideas will be updated
Parts or changes will be updated in this structure.
So if your ideas and modifications are valuable to other people who are interested in this project, please send your ideas and modifications and the design modifications can and will be made.
Visit the store and learn about the items being talked about here: the construction of the balcony garden is driven by many factors.
The first is the positioning of the overflow pipe from grow-
Bed, this decided from creatures-REACTOR.
More details will be added later for this part of the build.
This needs to be referenced for the Make Magazine volume.
47 issues and view other build details specific to pump placement details on the make project page.
Process improvement: this build can be improved at any time.
These improvements can and will take many different forms.
Changes will be made when new tips or better parts are learned.
Aquaponic aquaponic DIY Automation blog and new ideas will be updated
Parts or changes will be updated in this structure.
So if your ideas and modifications are valuable to other people who are interested in this project, please send your ideas and modifications and the design modifications can and will be made.
Visit the store and learn about the items being talked about here: AGponics StoreAir pump provides a gas source for creatures
The reactor and is attached to the center plate of the fish tank.
This is a safe place, and if the growth leaks or spills, it will not have any possibility of water accumulationbed occur.
More details will be added later for this part of the build.
This needs to be referenced for the Make Magazine volume.
Issue 47, and view other build details specific to the tank entry structure on the make project page.
Process improvement: this build can be improved at any time.
These improvements can and will take many different forms.
Changes will be made when new tips or better parts are learned.
Aquaponic DIY Automation blog and new ideas will be updated
Parts or changes will be updated in this structure.
So if your ideas and modifications are valuable to other people who are interested in this project, please send your ideas and modifications and the design modifications can and will be made.
Visit the store and learn about the items being talked about here: the AGponics store. Please visit this sensor build note: Sketch of sensor group test--
For the water balcony garden, the float switch is not a common or standard sensor in the arduino project.
If you do a Google search, you will find that there is very little information about how they operate and how to connect them in an aquaculture system.
This switch was found in the fish tank in the balcony garden.
The Crystal Head of the switch input
45 housing in which the connection allows to pass the switch signal to the micro
Controllers for processing and data display around the world (
If you use the Internet of Things version of this garden).
Things to Know About switches: Make sure you use a 10 ohm resistor on these switches.
These are \"analog\" reading sensors.
So be aware of this fact.
The switch returns only one of the two values: 0 or 1023--
The reading depends on how you place the switch in the tank.
The switch should be 1023 when it is high.
But this can be reversed if one wants to do so for some reason.
Wires on the sensor: 1. YELLOW -5 volt source (red wire)2. SIGNAL --
Yellow make sure you understand how these switches work before connecting them to the system.
A. collect all parts.
Water tank level sensor right angle float switch-
1 drilling of floating ball switch in Fish Tank.
Determine the size of the hole based on where to buy the floating switch.
Measure the purchased float switch to determine the size of the hole.
Not every manufacturer uses the same thread. ACTION -
2 insert the floating switch into the drill hole to ensure that the silicon gasket is inside the tank and then screw on the nut on the outside of the tank--TEST --TEST --TEST --
Not enough pressure to test--
When you purchase the test sensor after each operation, the test sensor ensures that the connection works properly and the test code returns the correct result.
If the tested sensor does not give the data output, then corrections need to be made before proceeding with the next step. Again TEST -TEST -TEST -
It will save a lot of time in the long run.
Code for Test Switch: Ultrasonic-
Distance sensors are a very common standard sensor that has been found in almost all of these arduino projects.
Do a Google search if you don\'t know what it can do or how to use it.
The sensor is mounted on the military cover of the fish tank covered by the growth bed in the balcony garden.
It is placed in a 2 \"black ABS pipe above the fish tank.
Both ends of the housing can be removed because this can easily access the sensor if it fails at any time.
This convenient access allows the sensor to be replaced when needed.
Pins on the sensor: 1. VCC -5 volt source (red wire)2. TRIGGER -(signal)--
You can choose the green/white wire
Just make sure you use a different color for each PIN 3. ECHO -(singal)--
You can choose the blue/white wire
Just make sure you use a different color for each PIN 4. Ground (black wire)
In almost all arduino projects, a very common and standard sensor has been found.
Do a Google search if you don\'t know what it can do or how to use it.
This sensor was found in the fish tank and bed in the balcony garden.
It is connected in each container using a cable gland that makes the connection waterproof.
The probe is fed into the crystal head
45 housing, connected on these housing, enabling the sensor to be delivered to the micro
Controllers for processing and data display around the world (
If you use the Internet of Things version of this garden).
Make sure you use 4. 7ohm resistor (PULL-
UP configuration)
With these probes
Please see the instructions below and learn more about this probe on the following website
Make sure you write the hex issued by the \"Finder\" sketch below.
This hexadecimal code will be used for system-wide temperature testing of fish tanks and Grow Ben for the last Test of wires and sensors.
Level 2: This is a sketch that will use the two hexadecimal codes of level 1 above.
You will need to replace the HEX code in the sketch with your on HEX code, otherwise you will not get any readings and there will be an error when checking the temperature of the fish tank and growing bed.
Please visit the construction instructions for the sensor-Temperature-
Probe: The temperature sensor pin of the temperature sensor on the sensor: 1. VCC -5 volt source (red wire)2. Data -(signal)--yellow -white -blue -green -
The Orange wire depends on where you buy it and from whom you buy it. Ground (black wire)
A. collect all parts.
Waterproof temperature sensor temperature transmitter (Vktech)5pcs)
4-pg7 waterproof connector cover Black
7mm diameter cable--
1 Use 27/64-Inch drill--
Drill holes on the sensor side of the fish tank and have a long bed.
For the exact location of the cable joints, see the instructions for the fish tank and the growth bed. ACTION -
2 insert the cable gland into the fish tank drilling and growth bed. ACTION -
3 Put the cable gland nut outside the fish tank, it is very important to grow the bed and seal with sealant ----TEST --TEST --TEST --
Not enough pressure to test--
When you purchase a test sensor after each operation to ensure that the connection is working properly and the test code returns the correct result, test the sensor.
If the tested sensor does not give the data output, then corrections need to be made before proceeding with the next step. Again TEST -TEST -TEST -
It will save a lot of time in the long run.
The code will report the temperature of the fish tank and the growth bed: Test the code of the sensor & determine the hexadecimal code for each probe: The Transition block function is to cover the sensor wiring, allowing the transition and connection of the sensor, and helps prevent water from invading the wiring connection.
If the water penetrates and collects around the connection point, the sensor will not work.
More details will be added later for this part of the build.
This needs to be referenced for the Make Magazine volume.
Issue 47, and view other construction details specific to tank construction on the production project page.
Process improvement: this build can be improved at any time.
These improvements can and will take many different forms.
Changes will be made when new tips or better parts are learned.
Aquaponic DIY Automation blog and new ideas will be updated
Parts or changes will be updated in this structure.
So if your ideas and modifications are valuable to other people who are interested in this project, please send your ideas and modifications and the design modifications can and will be made.
Visit the store and learn about the items discussed here: Balcony Garden of the AGponics store-
Listed as a project in MAKE Magazine
Starting at page 62, to enable the sensor to operate correctly, the sensor needs to be installed and leak-proof.
It is a very good idea to use the correct hole size and sealant.
If the water should penetrate through the transition block then it can reach the middle
The connection point sensor will stop working and needs to be replaced.
The sensor does not report the reading at any time and all connections need to be checked and tested to determine that the signal is being sent and received.
More details will be added later for this part of the build.
This needs to be referenced for the Make Magazine volume.
47 issues and view other build details specific to the sensor installation structure on the make project page.
Process improvement: this build can be improved at any time.
These improvements can and will take many different forms.
Changes will be made when new tips or better parts are learned.
Aquaponic DIY Automation blog and new ideas will be updated
Parts or changes will be updated in this structure.
So if your ideas and modifications are valuable to other people who are interested in this project, please send your ideas and modifications and the design modifications can and will be made.
Visit the store and learn about the items discussed here: Balcony Garden of the AGponics store-
Listed as a project in MAKE Magazine
Starting from page 62, 47 coil resistors are very important for sensors working in all systems.
They are usually added or designed to the sensor. The grow-
Bed sensors require the addition of resistors at some point during wiring and sensor connection.
In this case, the resistor is placed near the sensor that needs the resistor.
There are many ways to connect a resistor to a sensor.
Everyone has a way to accomplish this task or their own way.
Not all products are easy to use or replace.
Both features are important for this build.
Solutions for growth-
The bed is a very reasonable design and can easily replace parts and sensors if there is a fault (which they do). ACTION 1 --
Pull the parts togetherPARTS: 12-
Europe-
Mini terminal-
Radio cabin carbon film 10 k Ohm 1/4 W 5% carbon Film 4.
7 k Ohm 1/4 W 5% (
10 bags and 100 bags)
Synthetic rubber coating--
Red/black/blue/yellow resin-Tap Plastics --
Tools: Dremel 7700MultiPro 7 1/15. 2-
Cordless rotary kit for EZ406-Volt02 1 1/2-
Inch EZ lock rotary tool cut
Digital Multimeter 2-metal cutting starter kit for off-wheel and core shaft-Make two (2)
From the action of the whip scour 3-a single \"terminal unit\" of the larger terminal block\"-
Cut out a small amount of plastic from the bottom of the \"terminal unit\" created in Action 2 between the various parts of the \"terminal unit. ACTION 4 --
Push the resistance into the gap generated in Action 3
Bend the wires in the opposite direction around each terminal part. ACTION 5 --
Bend the resistance wire 180 degrees and insert the resistance wire through the gap between the metal terminal bracket and the plastic housing-
There will be resistance wires coming out at the other end.
Now bend the extended end back to the metal terminal stand and soldier for the best connection action 6--
Finish the other end of the resistor by leaving the part--
Make sure the resistor end is connected to the various parts of the \"terminal unit\" instead of connecting to the same terminal part-
It will only work in one way! !
If the \"terminal unit\" is incorrect, it will not be read correctly. ACTION 7 --TEST -
The connection works. ACTION 8 --Mix Magic-Sculpt. ACTION 9 --
Fill the blank of the terminal unit with magicSculpt -
Allow Harden to act at night 10--
Color coding is helpful to make things easier:UP\" 4.
The 7 K ohm resistor media probe needs \"pull-
10 K ohm resistance. Media Probe -Signal \"PULL-DOWN\" --
10 k ohm resistance (Yellow)--ANALOG PIN (-)Ground (black)\"PULL-DOWN\" --
10 k ohm resistance (+ )Positive (red)\"PULL-UP\" --4.
820 k ohm resistance-Signal \"PULL-UP\" --4.
7 K ohm resistance (Blue)-
Digital PINPROCESS improvement: this version can be improved at any time.
These improvements can and will take many different forms.
Changes will be made when new tips or better parts are learned.
Aquaponic DIY Automation blog and new ideas will be updated
Parts or changes will be updated in this structure.
So if your ideas and modifications are valuable to other people who are interested in this project, please send your ideas and modifications and the design modifications can and will be made.
Visit the store and learn about the items discussed here: Balcony Garden of the AGponics store-
Listed as a project in MAKE Magazine
The volume 47 connection diagram starting on page 62 will map all connections that occur between all the components that make up the sensor connectionbed.
It is important to know this, because it is an important skill to know how to solve the sensor problem in every part of the balcony garden. RJ-45 Jack --BLUE -
The FISH TANKThis Jack is the connection point for the rest of the FISH tank system. A CAT-
5 Cable for connection to RJ-
45 hubs as part of growth-Bed Platform. The RJ-
The 45 Jack has the capacity of 8 connections.
In the fish tank, there are only 4 for the float switch and b20 sensor.
The ultrasonic sensor is not connected to this RJ-
It has its own Cat 5 connector. Line chart: Black-
5 Jack Brown cat
Connection point red-
Jack Cat 5
Connection point yellow-
5 Jack orange/white cat
Blue connection point-
Blue Cat 5 Jack-
Black single terminal connection point (-)ground --RJ-
45-side black line from RJ-
The 45 Jack is connected to a single black terminal at one end.
Black single terminal (-)ground --
Sensor side black terminal (-)--
Separate the two directions from the 10 K ohm resistor terminals, the black line side of the transistor terminal black line is connected to the sensor side of a single black terminal, and the single terminal (+)positive --RJ-
45 sideRED jumpers from the Red single terminal are connected to the red side of 4.
7 K ohm resistor terminal RJ-
The 45 Jack red line is connected to one end of the Red single terminal jumper with the red RJ-
45 Jack terminal (+)positive --
The sensor is isolated from the red side of the media probe sensor. (
As long as the other one is treated as a signal side screw connection, it doesn\'t matter which screw to use)4.
7 K ohm resistor terminals--(BLUE/RED )RED -RJ-45 side --
The red jumper of the Red single terminal is connected here. BLUE -RJ-45 side --
Blue wire from RJ
There are 45 Jack here. RED -Sensor side --
Here is the red line from the 206. BLUE -Sensor side --
Here are the blue wires from the b201.
10 k ohm resistor terminals--(YELLOW / BLACK)YELLOW -RJ-45 side --
Yellow wire from RJ
There are 45 Jack here. BLACK -RJ-45 side --
The black line of the black single terminal is connected here. YELLOW -Sensor side --
Yellow line from the signal screw, which constitutes the screw of the medium probe black-Senor side -
Terminated here and not connected to anything.
Process improvement: this build can be improved at any time.
These improvements can and will take many different forms.
Changes will be made when new tips or better parts are learned.
Aquaponics DIY Automation blog and new ideas will be updated-
Parts or changes will be updated in this structure.
So if your ideas and modifications are valuable to other people who are interested in this project, please send your ideas and modifications and the design modifications can and will be made.
Visit the store and learn about the items discussed here: Balcony Garden of the AGponics store-
Listed as a project in MAKE Magazine
Starting from page 62, need to connect to micro sensor
Controller at some point.
This can be done either with a hard wire connection or with a wireless connection.
In this system of size and cost, the hard wire is the most cost-effective.
Others can expand on this basic system and develop wireless sensor connections.
The technology is now at the level that most manufacturers can reach.
Cost is a factor that requires a higher level of expertise than an ordinary \"Water Park.
More details will be added later for this part of the build.
This needs to be referenced for the Make Magazine volume.
Issue 47, and view other construction details specific to tank construction on the production project page.
Process improvement: this build can be improved at any time.
These improvements can and will take many different forms.
Changes will be made when new tips or better parts are learned.
Aquaponic DIY Automation blog and new ideas will be updated
Parts or changes will be updated in this structure.
So if your ideas and modifications are valuable to other people who are interested in this project, please send your ideas and modifications and the design modifications can and will be made.
Visit the store and learn about the items discussed here: Balcony Garden of the AGponics store-
Listed as a project in MAKE Magazine
Starting from page 62A, here is the number of fish choices.
Only the most useful fish are discussed here, but there are many other options for auqaponics.
Internet search will provide a complete list and information of aquaculture fish.
More details will be added later for this part of the build.
This needs to be referenced for the Make Magazine volume.
Issue 47, and view other construction details specific to tank construction on the production project page.
The black Moor goldfish is one of the most popular goldfish varieties, and is loved by millions of fish friends.
Recommend aquapon to beginners.
The black Moor is twin.
Goldfish with round or eggshaped body.
Its shape is enhanced by big eyes protruding from the side of the head.
The black Moor is basically the black version of the telescope eye goldfish.
As you have noticed, there is a color for this fishblack.
The scale color can be anywhere from light gray to dark black.
It is important to note that some black moors may not remain pure black forever because they become metal orange when they are kept in warm water.
Most of the Black Moors are locked up in an aquarium instead of a pond because their vision is far from perfect.
The specimens available today either have a wide tail, a ribbon tail, or a butterfly tail.
This is a good starter fish for the balcony garden.
Especially if the coating fish tank option is used.
The black and white coatings match well.
They can handle a wide range of temperatures and can only grow to about 4 to 5 inch.
They are very interesting and one of my favorite fish in the fish tank.
They swim slowly and have bad eyes, so be careful which fish you pair.
They worked well with cockroaches from the golden dojo.
There is no economic value at all.
But for the balcony garden, this is a great option that will give you and your neighbor children many years of entertainment value.
The name of gold Road field roaco: angu fish, this is not the fish you will find on any list of aquaculture fish.
I don\'t know why that is, but no one is talking about them at all.
So no one worked with them because they were used in Asian cooking around the world, which surprised me.
So for me it seems like a perfect choice for water sports.
I use the golden dojo loach as the bottom feeder.
I found that they cleaned the bottom of the tank very well and it was interesting.
Most environmental conditions indicate that they can only live in water below 50 degrees.
But when the temperature was in my 20 s I put them in the tank outside and they were successful and didn\'t lose any of them.
The loach in the dojo will reach about 6 (15 cm)
In the aquarium, though in nature, it can become bigger.
It is reported that these fish are as high as 1/4 in the wild environment \"(28 cm).
The Baensch Aquarium Atlas, Volume 2, reported that they reached 20 \"(50 cm).
Their life span is generally 7-10 years.
The body of this Loach is long and cylindrical, almost eellike.
It is round in front, but flat in the back, either thin or heavy.
There are five pairs of tentacles around their mouths, two of which are located on the lower jaw.
They can be brown to yellow, with dark green gray to dark brown spots, usually forming a marble pattern and pale on the lower side.
The Golden dojo loach is a common color deformation.
It ranges in color from yellow to orange and is usually very thin.
They do have spots, but they are usually very weak.
Economic/social impact: Eastern weather loach is not eaten in Australia or the United States, but is an edible fish in many Asian countries.
Sold by size. -
Shinikin goldfish was first developed in early 1900 from the telonia goldfish variety in Japan.
They are often referred to as \"Koi of the poor \".
\"The size of shubongkins is similar to that of the comet goldfish, which is characterized by pearl-like scales and calico colors, which contain shades of red, gold, purple, blue, black and white.
The bluer shubangkins is considered to be more valuable.
There are three varieties of shubonkins;
United States, London and Bristol
S. shubongkins has almost the same body shape as a comet goldfish, but the tail is slightly larger and hangs down more.
Bunbunbunkins in London is more sturdy, similar to the size of ordinary goldfish, and lacks gorgeous fins corresponding to them.
Bristol shubongkins has a mid-sized tail fin with rounded edges, similar to the capital \"B \".
This is another great starter fish in the balcony garden.
They continued swimming in very cold conditions.
They can get along with all the other fish around 6 to 7 inch.
A lot of waste is generated, so the filter needs to be changed, so make sure this is managed, otherwise the condition of the water will be bad for you.
Similarly, the fish has no economic value at all. TALAPIA --
As cultivation of Talapia is not allowed in some parts of the country, be sure to comply with local regulations.
Up to 10 pounds people can eat about 2 pounds of them.
The balcony garden does not support 10 pound fish.
Tilapia fish, native to Africa and the Middle East, is widely used in food production around the world.
They are abundant in many Mexican lakes, where they are introduced and caught by thousands of people on commercial nets, found in some lakes in the southern United StatesS.
Especially in Florida waters.
Maybe the best.
The known members of this group are tilapia, Mozambique (
Mossambicus)
Widely planted in fish ponds.
Tilapia fish are generally small, moderate in depth and compressed in body.
The dorsal fin is long and the anterior fin is spiny;
There is a single nostrils on both sides of the nose;
A broken side line can be divided into two or three parts.
The difference between it and bluegill is that there is no dark blue or black vascular flap.
They are mainly algae and plant breeders in fresh water.
Many people are mouth-to-mouth fish, although some build ovaries after spawning.
Most of them are small, although it is reported that some can grow to 20 pounds, and they are educated species.
Despite their abundance, tilapia fish have little movement
Although they are valuable edible fish, they are of fishing value in most areas where they are introduced.
In some of the regions introduced, Tilapia has mixed value, crowding out some native species, developing poorly, breeding rapidly, sometimes producing large crops for very small individuals, and also for large predators, especially the big mouth bass provides feed. SUNFISH -
Green sun fish is a member of the central family that is widely present and frequently captured.
Its meat is white and flaky, and it is a good food fish. Identification.
The green sun fish has a slender body;
Quite long nose and mouth;
There is also a big mouth, the upper jaw extends under the pupil of the eye;
It\'s like a large-mouthed Gill sunfish and a small black bass.
It has a short, round chest fin, a connected dorsal fin and an extended Thorn cover flap, or a black \"earlobe\" with a light red, pink or yellow edge.
The body is usually brown to olive or turquoise, bronze to Emerald-
Green gloss, yellow green on the lower side, yellow or white on the abdomen.
Adult fish have a large black spot at the back of the bottom of the second dorsal fin and anal fin, breeding male fish have yellow or orange edges on the second dorsal fin, tail fin, and anal fin. Size.
The average length is 4 inch, usually ranging from 2 to 8 inch, and the maximum length is 12 inch, which is very rare.
Most of them weigh less than half a pound. The all-
Breaking the world record is 2-pound, 2-
An ounce of fish caught in Missouri in 1971.
Yellow Bass is the most widely distributed member of the Percidae family, and yellow bass is one of the most popular and sought after fish in all freshwater fish, especially in states and provinces in North America.
This is because of its wide range of supplies, which in general are easy to catch and taste delicious. Identification.
Unlike the white bass that is actually a temperate bass, the yellow bass is the real bass.
While it is similar to the real bass in many ways, it is more closely related to walleye and sauger, other members of the Percidae family.
Its most striking feature is the brightly colored golden body with a slightly orange colorcolored fins.
The color of the yellow bass is green to gold, with six to eight dark, wide vertical strips extending from the back to the bottom of the side line, white belly, and orange lower fins during the breeding season.
The body is long and round, and has a hunchback shape;
This is the result of the deepest part of the body starting with the first dorsal fin and then gradually becoming thinner to the beginning of the second dorsal fin.
This feature is a bit similar in white bass, and yellow bass has nothing to do with it, although the two fish may live in the same waters.
Yellow Bass is different from trout and salmon due to lack of fat fins, which are usually located between the dorsal fin and the tail fin and are also different from the sun
Fishing with an independent dorsal fin (
Connect in sunfish)
And two or less anal fins (
There are three or more sun fish).
It is different from walleye and sauger because it lacks canine teeth and the body shape is usually deeper. Size/Age.
The average yellow bass caught by anglers weighs between 1 and 3 lbs and is 6 to 10 inch long.
In lakes with poor numbers, fish are at the low end of this range, 10-
Inch fish is a kind of habitat, stripe habitat, coon habitat, Jack habitat, Lake habitat and American habitat;
French: abnormal. Distribution.
Yellow Bass is common in northern United States and Canada.
They extend east from Nova Scotia to the Santy River Basin in South Carolina, West from the Great Lakes to the edge of BC and then to Washington.
In the northwest of Canada, few people extend north from the Great Slave Lake to the Great Bear Lake.
They appear in almost every state due to stocking, but are sparsely distributed in most parts of the South, West and Central West;
They are also rare in British Columbia and northern Canada.
Although the Yellow Bass is a freshwater fish, Nova Scotia fishery personnel report that the fish is occasionally found in salty waters along the Atlantic coast.
Bass, 151 yellow bass, yellow cypress.
Qxd 11/7/03 page 151 at 11: 08 am is generally considered quite large.
Some lakes in 1-
Pounds and bigger grades, although more than 11 lbs and 2 lbs of fish are not common.
MOSQUIOFISHThe mosquitofish is closely related to the bacterial spores of the large Poeciliidae family, the squid or cyprinodonts, and the difference is mainly in proposing its youthful vitality rather than spawning.
This species, also known as topminnow or western mosquitoes in North America, is known for its number one scourge of mosquito larvae.
Although there are other larvae
Mosquitoes feed on a variety of fish and are able to endure salinity and levels of pollution, which will kill most other species and produce up to 1,500 cubs in their lifetime.
Mosquito fish, native to the southeastern United States, has been introduced into suitable warm waters around the world since it was introduced to Hawaii in 1905 and almost wiped out mosquitoes.
As a result, the Betta is the widest --
Freshwater fish on Earth (
Other species of mosquito fish have not been successfully introduced yet).
Recently, it has been introduced in many places to help control the West Nile virus.
The female mosquito is about 2 inch long and the male is only half large.
The male anal fin is modified to an intermittent organ for the introduction of sperm into the female body.
Mature females may produce three or four pro-fish in one season, sometimes 200 or more cubs at a time.
The fish is easily raised in the aquarium and is not sensitive to temperature changes, but it does not adapt well to living with other fish.
CATFISHCatfish is a large group of freshwater fish distributed all over the world.
Some believe that there are more than 2,200 species of catfish worldwide.
Many of the world\'s important river systems have at least one catfish, which in most cases is one of the largest fish in the river system.
The same is true of large lakes, especially the reservoirs of large rivers.
Many catfish are important in business and entertainment. Species.
Most catfish are scaleless, but some of them are heavy.
They vary in size, from small versions popular for aquarium use to huge specimens, with a minimum size of no more than 12 2 inch, of which the largest one recorded more than 600 pounds.
Most catfish prefer places where lakes and rivers are slow;
Some people do their best in fairly fast waters.
Tenacious fish, which can survive in the water for quite a long time, especially when kept wet.
They are characterized by a single dorsal fin and fat fin;
There are strong, sharp thorns on the dorsal and thoracic fins;
The upper and lower jaw has a feeling of tendril.
The head and mouth are generally wide and the eyes are small.
Bluegills\' is one of the most popular pan-fish species in North America.
This notoriety is the result of their great distribution, brave fighting and excellent taste.
Commonly referred to as \"bre fish\", bluegills is the most widely distributed pan fish, along with companions and related species such as red breast sun fish, green sun fish, pumpkinseeds, or in similar shell biscuits and Dragon ear sun fish, they are similar in structure but look different.
Despite the high number and popularity of bluegills, it has not been heavily attacked in some waters and has therefore not been fully utilized.
Bluegills are so prolific that their population can grow beyond the carrying capacity of the water that many people become poorly developed;
These poorly developed fish are considered pests and the waters containing them must be drained and replenished frequently.
Although there are mixed populations and species, there are three species of blue back fish. Identification.
Bluegill has an apparently compressed oval or circular body, small mouth and small head, which is a typical feature of members of the sunfish family.
The chest fin is pointed.
Its color varies from lake to Olive, dark blue or blue-purple to side dotted with yellow and green, overall blue;
Some fish, especially those found in the Quarry Cave, may actually be clear and colorless.
Usually, there are six to eight vertical bars on both sides, which may or may not be prominent.
The Gill cover extends to form a wide black flap that is blurred in the color of the cub and is not surrounded by lighter boundaries like other sun fish.
Dark blue stripes are found on the lower cheek between the chin and the gillid, and often there is a dark mark on the bottom of the anal fin.
The mating males are more vivid, the head and back are blue, the chest and abdomen are bright orange, and the pelvic fins are black. Size/Age.
The fish range in length from 4 to 12 inch, with an average length of 8 inch and a maximum length of 161 to 4 inch.
The biggest bluegill ever was a 4-pound, 12-
Ounces of specimens collected in 1950
The growth changes of Bluegill are so large that the age estimates associated with the size are not accurate at best.
Bluegills is estimated to have lived for 10 years.
The small mouth bass is the second largest member of the central family of solar fish and is also the original breed in North America.
For anglers, it is the most impressive of all freshwater fish, coveted for its combat effectiveness.
The small mouth is not actually a bass, but a solar fish, and its mouth is small compared to some relatives.
It is naturally a fish of a clear river and lake and is widely introduced into other waters beyond the original range.
Small mouth bass living in small to Intermediate streams is not on average as large as bass in lakes or reservoirs, although fish from large rivers, especially those with tail water fisheries, can reach large sizes.
The smobir bass is braver than their Lake.
However, the brothers who live are often more streamlined and have no drooping stomachs.
The small-mouth bass is occasionally confused with the large-mouth bass that they all appear, as well as the spotted bass and the red-leaf bass.
They are known to cross with spotted bass.
It is often known that there are two sub-species: the small mouth of the North, the multi-meter wing, and the new mouth of the M. d. velox. Identification.
The small mouth bass is robust and has slight compression and elongation on the side;
A prominent lower jaw; red eyes;
There is also a wide and slightly forked tail.
Its pelvic fin is located on the body below the thoracic fin;
There is a spine in the front of each pelvic fin and anal fin.
Two dorsal fin connections or gaps;
The first one has a thorn, the second one has a spine, and the back is soft light.
It ranges in color from brown, golden yellow and Olive to green, light to gold on the sides, and white on the abdomen.
The sides of the small fish have more obvious vertical strips or rows of spots, and the fins at the tail or tail are orange at the bottom, followed by black, and then white outer edges.
Any fish native to the Delta seems to be custom made
To withstand the drought, it must be the bass of Sacramento.
Bass is resistant to a wide range of water quality that can thrive in clear, cold water or warm water, so stagnation and thick algae can suffocate cows.
It can survive in slightly salty water, in water contaminated by runoff, and in muddy ponds only a few inches deep: perfect for drought-era Delta.
In native delta habitat, however, there are only a few sarabans bass left at most.
The bass is widely planted in ponds and reservoirs outside the natural range, and in the Delta and other limited original ranges, the bass has become functionally extinct.
Like a common name, the Sacramento bass is not actually a real bass.
It is known to be a member of the sunfish family, the central family, as well as the blue fins and the big mouth bass.
In fact, it is the only member of this family, native to North America west of the Rocky Mountains, and has evolved without having to compete with other members of the sunfish family for food or habitat, it may be the beginning of the middle New Century and the end of the fifth century.
3 million years ago.
Sacramento bass is not picky about this habitat.
In addition to the streams of the Delta and the Central Valley, Archoplites once thrived in the Salinas and Pagaro rivers in the Monterey Bay area and in the clear lakes.
Although the bass is really clear
Flowing water, it seems to prefer the other one: stagnant pool and side
Rivers, swamps with algae, ponds blocked by new vegetation.
The forbearance of the water temperature of the sarramandos includes the temperature.
Adults can survive in much warmer water than many other Delta fish can endure: until the water reaches about 72 degrees Fahrenheit, adult Sacramento bass is fine.
Warmer than this, the health of adults will drop, and if they can, they will go to the cool waters.
The larvae of the bass can even endure the warm sea water.
This is a good thing, because the waters where sarramandos tend to spawn are heavily vegetated, shallow and turbid.
Vegetation slows the flow of water, and suspended silt and organic matter absorb sunlight, both of which warm the water.
The Sacramento Black Fish is the native of the Sacramento River basin and the Clear Lake.
However, the fish were found in various other streams and reservoirs in California and extended to parts of Nevada.
The Sacramento Black Fish likes the warm, turbid waters that are small to large streams, and is often associated with a series of non-natives.
Sacramento Black Fish likes the water temperature in the range of 22-28°C.
They have demonstrated a great ability to adapt to extreme environments, including water temperatures over 30 °c and salinity over 9 ppt.
The black fish is usually a suspended feeder with plankton and plankton as food, including the full class, insect larvae, tail class, branch horn class and debris class.
Juvenile fish tend to live on plankton and insects at the bottom of the water column or stream.
By the lake, where prey is abundant, young fish may flock together.
With the growth of the Sacramento black fish, they are increasingly dependent on pumping suspended substances into the mouth, using the squid as a filter, and capturing food in the mucus at the top of the mouth.
Adults live mainly on food from organic matter and algae.
Residents of ponds and lakes can make a living on plankton, algae and plankton, and can also pick up organic matter and small animals from the bottom.
The Sacramento black fish may mature sexually in the first, second, third, or fourth years, depending on how fast they grow.
Men tend to reach sexual maturity before women, and women\'s egg production appears to be directly related to body size.
Females in 171mm FL may produce 14,700 eggs, while females in 466mm FL may produce about 346,500 eggs.
Spawning generally occurs in spring, but in the range of water temperature 12-12, it may occur at any time between July. 24°C.
Spawning beds are usually distributed in areas with dense vegetation and shallow waters.
Eggs are attached to the local substrate until the larvae appear and start foraging in the same area.
Process improvement: this build can be improved at any time.
These improvements can and will take many different forms.
Changes will be made when new tips or better parts are learned.
Aquaponic DIY Automation blog and new ideas will be updated
Parts or changes will be updated in this structure.
So if your ideas and modifications are valuable to other people who are interested in this project, please send your ideas and modifications and the design modifications can and will be made.
Visit the store and learn about the items to talk about here: Balcony Garden-
Listed as a project in MAKE Magazine
47 volumes of water gardening starting on page 62: A StepBy-
Sylvia Bernstein water park book-a step-by-step guide for raising vegetables and fish in October 11, 2011
Good resource store: find the items to talk about in structures.
AGponics Storeaquaponic DIY Automation blog Ken Schultz\'s guide to the field of freshwater fish his guide comes from award-winning awards
Schulz\'s Fishing Encyclopedia won the prize.
It weighs nearly 10 pounds and contains information on 8 pages and 1,916 pages. 5-by 11-
Inch format, this is not a book that can be taken to the field or read casually.
One of the many advantages of the encyclopedia is its detailed information on global prey and predator species, many-
Including many bait designers, scientific researchers and anglers
Found very valuable, not anywhere else.